| Welcome, Guest |
You have to register before you can post on our site.
|
| Forum Statistics |
» Members: 57,199
» Latest member: AdamTOr
» Forum threads: 7,712
» Forum posts: 8,578
Full Statistics
|
| Online Users |
There are currently 198 online users.
» 3 Member(s) | 191 Guest(s)
Applebot, Baidu, Bing, Google, AdamTOr, BruceesonS, Jamestruck
|
| Latest Threads |
Looking for suppliers – A...
Forum: Buying Leads
Last Post: askaluadmin
09-12-2025, 08:12 AM
» Replies: 0
» Views: 2,785
|
Sell Aluminum 6063
Forum: Selling Leads
Last Post: askaluadmin
09-12-2025, 08:00 AM
» Replies: 0
» Views: 2,746
|
Is a carbide drill best o...
Forum: aluminium faq
Last Post: toyota1515
09-10-2025, 09:18 AM
» Replies: 0
» Views: 5,224
|
5052-H32 aluminum sheets ...
Forum: Knowledge & Technique
Last Post: toyota1515
09-04-2025, 02:42 AM
» Replies: 0
» Views: 4,066
|
Advantages of Haomei Alum...
Forum: Knowledge & Technique
Last Post: hmwadeseo
09-02-2025, 07:11 AM
» Replies: 0
» Views: 3,831
|
Advantages of Aluminum Co...
Forum: Knowledge & Technique
Last Post: hmwadeseo
09-02-2025, 07:08 AM
» Replies: 0
» Views: 3,646
|
What is the function of p...
Forum: aluminium faq
Last Post: hmwadeseo
08-11-2025, 06:33 AM
» Replies: 0
» Views: 8,247
|
What is this aluminum cla...
Forum: aluminium faq
Last Post: hmwadeseo
07-28-2025, 06:35 AM
» Replies: 0
» Views: 8,478
|
5 Reasons to Use Aluminum...
Forum: Knowledge & Technique
Last Post: hmwadeseo
07-28-2025, 06:33 AM
» Replies: 0
» Views: 4,042
|
What Is Aluminum Cladding...
Forum: aluminium faq
Last Post: hmwadeseo
07-28-2025, 06:32 AM
» Replies: 0
» Views: 7,311
|
|
|
| Advantages Of Mingtai Aluminum's 3105 Aluminum Plate For Bottle Caps |
|
Posted by: mingtaial - 06-03-2024, 08:59 AM - Forum: aluminium faq
- No Replies
|
 |
In order to increase the demand for deep drawing of aluminum for bottle caps, the wine industry is gradually increasing the use of aluminum for bottle caps. The working environment of the wine industry is very strict, which requires structural materials to have certain tensile strength, yield strength, elongation, pressure resistance, deep drawing and other properties. In addition, considering the structure and use environment of the wine industry, the wine bottle material also needs to have good food safety. Ordinary aluminum plates for bottle caps are difficult to meet the performance and safety of such strength bottle caps.
3105 aluminum plate belongs to a series of AL-Mn alloys, with good rust resistance and good electrical conductivity. The aluminum content is 98%. Since 0.3% of copper is added to it, the conductivity can reach 41%; 3105 aluminum plate cannot be strengthened by heat treatment, so cold processing methods are used to improve its mechanical properties: it has high plasticity in the annealed state, good plasticity during semi-cold hardening, low plasticity during cold hardening, good corrosion resistance, good weldability, and poor machinability.
The main thickness of 3105 bottle cap material products is 0.15-0.3mm, and the tempers are O, H12, H14, H16, etc.;
Advantages of Mingtai Aluminum 3105 aluminum plate for making bottle cap materials:
1. 3105 aluminum plate has good electrical conductivity. Since 0.3% copper element is added to it, the conductivity can reach 41%;
2. 3105 aluminum alloy has good anti-rust performance and is used in various bottle and can covers to achieve the effect of making the appearance of bottles and cans beautiful for a long time;
3. Good processing performance, novel product shape and long service life;
4. Strictly control the processing quality, texture, grain, composition, etc. of the product, and the product performance reaches the international advanced level.
|
|
|
| 1060 aluminum plate for transformers Manufacturer introduction |
|
Posted by: mingtaial - 05-31-2024, 08:23 AM - Forum: aluminium faq
- No Replies
|
|
A brief introduction to 1060 aluminum plate for transformers
Transformers are a common static electrical equipment. At present, it is very common to use aluminum to produce transformers in the market. For example, some larger companies: Siemens, ABB, etc. use aluminum to produce transformers. 1060 aluminum plate is a good aluminum material for transformers. It has good ductility, excellent conductivity, and good tensile strength, which can fully meet the processing requirements of users.
Price of 1060 aluminum plate for transformer
When users purchase 1060 aluminum plate for transformer, the price is a more concerned issue. Compared with similar 1060 aluminum plates for transformers on the market, Mingtai 1060 aluminum plates for transformers not only have a very good advantage in quality, but are also very economical in price. On the one hand, Mingtai Aluminum is a direct sales manufacturer, which develops, designs and sells its own products, and the price is more transparent. Mingtai Aluminum's listed company management is more rigorous and scientific, so the manufacturing cost and investment cost will be relatively well controlled. On the other hand, Mingtai Aluminum mainly relies on small profits but quick turnover, and its expected profit has always been lower than that of other manufacturers. It always adheres to the principles of fairness, affordability and low quotation to benefit more users.
Recommended 1060 aluminum sheet manufacturer for transformers - Mingtai Aluminum
Henan Mingtai Aluminum is a large-scale aluminum sheet manufacturer in China. It has rich experience in aluminum sheet processing technology and design. The design of each product required by users is very scientific and reasonable. It has strict requirements on processing technology. After each process, it creates more high-quality products. Over the years, it has been well received and trusted by users with perfect and thoughtful after-sales service and high-quality products. At present, Mingtai Aluminum's aluminum sheet, strip and foil and other products are not only very popular in the domestic market, but also have very good sales in many countries and regions such as Europe, America, Japan, South Korea, and India. Recently, there are continuous foreign users coming to buy Mingtai 1060 aluminum sheet.
If users want to buy high-quality and low-cost 1060 aluminum sheet for transformers, then Henan Mingtai Aluminum must be your good choice. We have professional production technology and a superb team of experts. Each product produced guarantees excellent quality, reliable performance, and very economical price. For more product information and preferential quotations, you can click online consultation.
|
|
|
|
| 5083 medium-thick aluminum plate 5083 marine aluminum plate 5083 automotive aluminum |
|
Posted by: mingtaial - 05-30-2024, 08:43 AM - Forum: aluminium faq
- No Replies
|
|
5083 aluminum plate is a typical aluminum-magnesium alloy with light weight and high strength. With its excellent performance, it can be widely used in many industries such as automobile manufacturing, shipbuilding and rail transportation. With the vigorous development of lightweight, the demand for 5083 medium-thick aluminum plate in aluminum tank trucks and marine aluminum plates has increased.
5083 medium-thick aluminum plate-5083 marine aluminum plate-5083 automotive aluminum plate manufacturer introduction
In recent years, the domestic aluminum processing market has continuously expanded its research and development efforts and increased its production strength for 5083 medium-thick aluminum plates. Mingtai Aluminum is a more representative aluminum plate manufacturer. Mingtai Aluminum has a 1+1 hot rolling line. Its products have high technical level, stable and excellent performance, and have passed the authoritative certification of domestic and foreign aluminum plate identification; Mingtai Aluminum's 5083 medium-thick aluminum plate is very popular among domestic aluminum tank truck manufacturers, and has won the praise of many users, and has established long-term friendly cooperation with many large domestic tank truck manufacturers.
5083 medium-thick aluminum plate-5083 marine aluminum plate-5083 automotive aluminum plate price (processing fee)
The price of 5083 medium-thick aluminum plate-5083 marine aluminum plate-5083 automotive aluminum plate has always been a point of concern for many users, but because the needs of users are different, the 5083 medium-thick aluminum plate manufacturers on the market are different, and the process technology and configuration adopted by each are different, which also leads to different prices.
In addition to user needs and the selected manufacturer, comprehensive calculations should also be made in combination with factors such as processing fees and aluminum pricing.
Henan Mingtai AL.Industrial Co., Ltd has more than 22 years of development history and experience, reliable product quality, high process technology level, and products are all sold at wholesale prices. The price is very favorable. There is also a professional R&D and design team that customizes on demand according to your needs and supports users to visit the factory. If you want to know more product details and preferential quotations, you may wish to click on the parameters of 5083 aluminum plates used in various industries to learn more.
|
|
|
|
| 5454-h32 aluminum plate for carriage factory price |
|
Posted by: mingtaial - 05-29-2024, 08:33 AM - Forum: aluminium faq
- No Replies
|
|
With the rapid development of the economy, energy conservation, environmental protection and lightweight automobiles have become a trend. Aluminum for transportation is a growth point in the aluminum processing industry. Aluminum for carriages has good corrosion resistance, good welding performance, energy conservation and environmental protection, and a high recycling rate. This article mainly introduces the price of 5454-h32 aluminum sheet for carriages and related information of manufacturers.
What is the price of 5454-h32 aluminum sheet for carriages?
What is the price of 5454-h32 aluminum sheet for carriages? There are high and low quotations on the market, and the difference is still relatively large. The specific price should be determined according to the manufacturer and product specifications. In addition, only when the manufacturer of 5454-h32 aluminum sheet for carriages is selected correctly can high-quality products be purchased. Because the price of aluminum ingots for 5454-h32 aluminum sheet for carriages changes, its manufacturing process, performance and quality will also be different. It is recommended that users compare prices from three different suppliers when purchasing, and also pay attention to after-sales service. Timely improvement of after-sales service can make users more assured and reliable in purchasing and later use.
Recommended manufacturers of 5454-h32 aluminum plates for carriages
When users choose manufacturers of 5454-h32 aluminum plates for carriages, it is very necessary to inspect the manufacturers in all aspects. Only by choosing the right manufacturers can the quality and performance of the products purchased be guaranteed. There are many manufacturers on the market. Here we recommend Henan Mingtai Aluminum for you. It performs well in all aspects and wins the trust of users in the market.
1. Strong comprehensive strength of the manufacturer
Mingtai Aluminum has been established for nearly 30 years. The company currently has more than 5,000 employees and total assets of 6 billion yuan. It is used for professional and regular production of industrial plants, with complete production facilities, high technical level, skilled craftsmanship, strong professional skills, and independent production lines from design, research and development to production and inspection. Each production process is carried out in accordance with national standards, and the products are exported to more than 60 countries and regions at home and abroad.
2. High product quality
Regard product quality as life, and always follow the quality policy of being responsible for every process, every product, and every user, and serve users wholeheartedly. All products have passed the relevant quality system certification, and users can rest assured to buy.
3. Comprehensive service
24-hour online service can effectively solve various production needs of users in a timely manner, enthusiastically solve user concerns before sales, design and configure production plans for free, and schedule and deliver in a timely and effective manner, and can track and return visits in a timely manner.
Henan Mingtai Aluminum specializes in the production of 5454-h32 aluminum plates for carriages. It has strong strength, high quality, low price, and good quality. The products have good reputation and support from users. Users with needs are welcome to consult and purchase.
|
|
|
|
| How to Choose the Right Aluminum Swing Door? |
|
Posted by: toyota1515 - 05-29-2024, 03:02 AM - Forum: aluminium faq
- No Replies
|
|
Aluminum swing doors are a popular choice for both residential and commercial applications. They offer a perfect blend of style, durability, and functionality. But with a variety of options available, selecting the right aluminum swing door for your needs can feel overwhelming. This guide will provide insights on selecting the perfect one for your needs.
Aluminum Swing Door
Understanding Aluminum Swing Doors
Aluminum swing doors are popular choices for commercial and residential properties due to their strength, low maintenance requirements, and modern appeal. These doors are crafted from aluminum frames and can be customized with various glass options, making them ideal for enhancing natural light flow and creating an open ambiance. There are different types and grades of aluminum swing doors to consider:
Types of Aluminum Swing Doors:
Aluminum swing doors can be classified based on various factors such as their design, functionality, and intended use. Here are some common classifications:
Based on Design:
Single Swing Doors: These doors open on a single hinge, swinging either inward or outward.
Double Swing Doors: Also known as French doors, these consist of two panels that swing open from the center.
Bi-Fold Swing Doors: These doors fold in on themselves, saving space and providing a wide opening when fully opened.
Pivot Swing Doors: Pivot doors rotate on a central axis, offering a unique design aesthetic and smooth operation.
Based on Functionality:
Manual Swing Door: Operated by pushing or pulling the door handle to open and close.
Automatic Swing Door: Equipped with sensors or actuators that automatically open the door when someone approaches.
Fire-rated Swing Doors: Designed to resist the spread of fire, these doors are constructed with materials that meet fire safety standards. They are commonly installed in commercial buildings to compartmentalize fire hazards and provide safe evacuation routes.
Security Swing Doors: These doors are reinforced with additional features such as heavy-duty locks, security glazing, and intrusion detection systems to enhance security in commercial premises.
Energy-Efficient Swing Doors: Designed to minimize heat loss and improve insulation, these doors feature thermal breaks and weather sealing to reduce energy consumption and maintain indoor comfort levels. Such as aluminum swinging kitchen doors.
aluminum swinging kitchen doors
Based on Use:
Interior Swing Door: Installed indoors, typically separating rooms within a building.
Exterior Swing Door: Installed as entry doors to buildings or homes, providing access to the exterior.
Commercial Swing Door: Designed for high-traffic areas in commercial buildings such as offices, malls, and hospitals.
Common Grades of Swing Door Aluminum
The grade of aluminum used in the door will impact its strength, weight, and price. Here’s a brief overview:
6061 and 6063 Aluminum: These are the most common and affordable grades, offering a good balance of strength and weight.
7075 Aluminum: This high-strength alloy is ideal for situations requiring extra durability, such as high-traffic areas or extreme weather conditions.
How to Choose the Right Aluminum Swing Door?
Choosing the right aluminum swing door involves several considerations to ensure it meets your functional needs, aesthetic preferences, and budget constraints. Here’s a step-by-step guide to help you make the right choice:
Aluminum Swing Door applications
1. Assess Your Needs:
Determine the purpose of the door: Is it for interior or exterior use? Will it be used as a main entrance, patio door, or room divider?
Consider the location and environment: Will the door be exposed to harsh weather conditions, such as rain, wind, or extreme temperatures?
Identify specific requirements: Do you need the door to provide security, insulation, or soundproofing? Understanding your specific needs will help narrow down your options.
2. Understand Aluminum Swing Doors:
Types of Aluminum Swing Doors: Familiarize yourself with the different types available, such as single-panel, double-panel, or French-style doors, and determine which type best suits your space and usage requirements.
Grade of Aluminum: Aluminum doors come in various grades, with differences in strength, durability, and corrosion resistance. Choose a grade that aligns with your usage needs and environmental conditions.
3. Consider Design Preferences:
Explore design options: Aluminum swing doors come in various styles, from modern and minimalist to traditional and ornate. Consider the architectural style of your home or building and choose a door that complements it.
Customize as needed: Many aluminum doors offer customization options for color, finish, and hardware. Select options that match your aesthetic preferences and enhance the overall look of your space.
4. Evaluate Functional Features:
Ease of operation: Test the door’s operation to ensure it opens and closes smoothly, without sticking or dragging.
Energy efficiency:
|
|
|
|
| How to Install Aluminium Metal Roofing Sheet? |
|
Posted by: toyota1515 - 05-29-2024, 03:00 AM - Forum: aluminium faq
- No Replies
|
|
Aluminum metal roofing is a popular choice for residential and commercial buildings due to its durability, longevity, and low maintenance requirements. If you’re considering installing aluminum roofing sheets on your own, this guide provides a comprehensive overview of the process, from preparation to completion. Remember, this guide serves as a general framework, and it’s crucial to consult the specific instructions provided by your chosen aluminum roofing sheet manufacturer and adhere to local building codes.
![[Image: IMG_4877.jpg]](http://aluminium-roofing-sheet.com/images/IMG_4877.jpg)
Before You Begin: Safety and Planning
Safety is paramount when working on any roofing project. Always wear proper personal protective equipment (PPE) such as gloves, safety glasses, and sturdy footwear with slip-resistant soles. Working with aluminum sheets can involve sharp edges, so gloves are essential to protect your hands. It’s also crucial to work with a helper, especially when handling larger roofing sheets.
Before diving into the installation process, take the time to plan and prepare thoroughly.
Gather the necessary tools and materials:
Tools Materials
Power drill Aluminum roofing sheets (gauge thickness and panel profile according to your project requirements)
Metal shears or snips Underlayment material (felt, synthetic underlayment, etc.)
Tape measure Drip edge (metal flashing)
Level Ridge cap (metal flashing)
Chalk line Starter flashing (metal flashing)
Utility knife Valley flashing (metal flashing) (if applicable)
Caulk gun Screws specifically designed for aluminum roofing (length and type based on panel profile and local building codes)
Ratchet with various sockets Sealant compatible with aluminum roofing
Safety glasses Roof cement (optional, for additional waterproofing)
Work gloves /
Check local building codes: Ensure your aluminum roofing project adheres to all relevant building codes and permitting requirements in your area. Contact your local building department to obtain the necessary permits and familiarize yourself with any specific regulations that may apply to your project.
Measure your roof: Accurately measure the total roof area, including any hips, valleys, and eaves. This will help you determine the exact amount of aluminum roofing sheets, underlayment, and other materials required for the project.
Prepare the roof deck: The roof deck should be clean, dry, and structurally sound. Remove any old roofing materials, debris, and protruding nails. Ensure the deck is flat and level. Uneven surfaces may require corrective measures like shimming or replacing damaged decking boards.
Installation Process of Aluminium Roofing Sheet
Now that you’re well-prepared, here is the detailed installation process:
Install the drip edge: The drip edge is a metal flashing that gets installed along the eaves of the roof. It diverts water away from the fascia board and prevents water from entering behind the underlayment and siding.
Start at one end of the eaves and secure the drip edge using roofing nails or screws driven through the predrilled holes in the drip edge flange. Ensure the drip edge overlaps slightly at each joint.
2. Lay the underlayment: The underlayment acts as a secondary water barrier beneath the aluminum roofing sheets.
Unroll the underlayment material starting at the lowest point of the roof and work your way up. Overlap the underlayment by at least 4 inches horizontally and 6 inches vertically. Secure the underlayment using staples or roofing nails along the top edge, ensuring enough slack to prevent tearing when the roof heats up and expands.
3. Install the first panel: The first panel is crucial for setting the alignment and leveling for the subsequent panels.
Position the first panel at the eaves, ensuring a proper overhang according to the manufacturer’s recommendations and local building codes. Typically, the overhang is between 3/4 inch and 1 1/4 inch.
Use a level to ensure the panel is straight and square.
Secure the panel to the roof deck using screws specifically designed for aluminum roofing. Follow the manufacturer’s recommendations for screw placement and spacing.
4. Install subsequent panels: Subsequent panels are installed by overlapping the side joints of the previous panels.
Overlap the side joints of the next panel according to the manufacturer’s specifications, which is typically between 1 inch and 1 1/2 inch.
Ensure the panels are aligned properly and level before securing them with screws.
Repeat this process for all subsequent panels, working your way up the roof.
Install ridge cap and other trim: Once all the roof panels are secured, it’s time to install the ridge cap and other trim pieces.
The ridge cap covers the peak of the roof, providing a finished look and additional protection against water infiltration. Slide the ridge cap pieces together, ensuring proper overlaps and following the manufacturer’s instructions for securing them.
Apply sealant along the ridge cap joints and any other areas where water infiltration might occur, such as around vents, pipes, or chimneys.
6. Install valley flashing (if applicable): Valleys are the inward corners formed where two sloping roof sections meet. Valley flashing is crucial to prevent water from pooling and leaking in these areas.
Install valley flashing according to the manufacturer’s instructions and local building code requirements. This typically involves overlapping the underlayment material and folding the flashing up the sides of the valley. Secure the valley flashing using nails or screws and seal all seams with sealant.
7. Cut and install aluminum sheets around roof penetrations: Pipes, vents, and other roof penetrations require careful attention to ensure proper waterproofing.
Use metal shears to cut aluminum sheets to fit around each penetration, allowing for proper clearance.
Fold the edges of the cut sheet metal to create flanges and apply sealant underneath the flanges before securing them to the roof deck and penetration with screws. Ensure all gaps and seams are properly sealed.
aluminium roofing sheet installation
Finishing Touches
Inspect your work: Once the entire roof is covered and all trim pieces are installed, thoroughly inspect your work.
Ensure all aluminum panels are securely fastened, with proper overlaps and no gaps.
Check all flashing around eaves, ridges, valleys, and penetrations for proper installation and sealing.
Look for any damaged or loose screws and replace them if necessary.
Clean up the work area: After completing the installation, clean up the work area thoroughly.
Remove all debris, scrap metal, and leftover materials from the roof and surrounding areas.
Dispose of waste materials responsibly according to local regulations.
Additional Considerations:
Aluminum roof price: The cost of aluminum roof installation can vary depending on several factors, including the size and complexity of your roof, the type and gauge of aluminum sheets used, labor costs in your area, and any additional materials or features required. On average, aluminum roof prices can range from $2.15 to $7 per square foot, not including labor costs. It’s crucial to obtain quotes from qualified roofing contractors to get an accurate estimate for your specific project.
Roof pitch: The pitch of your roof, which is the angle of the slope, can affect the installation process. Steeper roofs may require additional safety precautions and potentially even professional help, especially for those without prior experience working at heights.
Complexity of your roof: Roofs with complex features like hips, valleys, and skylights require more intricate planning and installation techniques. If your roof has such features, it’s advisable to consult with a professional roofing contractor to ensure a successful and watertight installation.
|
|
|
|
| Aluminum plate manufacturer_5182 ring pull material aluminum plate 3004 3104 |
|
Posted by: mingtaial - 05-28-2024, 09:15 AM - Forum: Selling Leads
- No Replies
|
|
Aluminum beverage cans first appeared in the 1950s. With the rapid development of aluminum cans, consumption is also increasing rapidly year by year. Aluminum cans are mainly used for beverage packaging and ring pull materials. With the rapid development of aluminum cans Manufacturing technology continues to improve, with more and more available specifications and better performance.
5182 ring pull material aluminum plate 3004 3104 can lid material aluminum plate advantages
1. Deep drawing performance and dosage, widely used in tank materials;
2. It has good processing characteristics, excellent welding and corrosion resistance
3. Low density, high strength, easy to form, high recyclability and value;
4. Good version, high flatness, and precise thickness control;
5. High strength, good corrosion resistance, durable, economical and environmentally friendly.
5182 ring pull material aluminum plate 3004 3104 can lid material aluminum plate
5182 ring pull aluminum plate 3004 3104 can lid material aluminum plate price? This is a question that many users come to inquire about. The price ranges from high to low. There is no specific fixed value on the market. The price depends on the selection. Various factors such as product specification requirements and selected manufacturers are comprehensively considered. Among them, the quotations given by direct selling manufacturers will be relatively cheaper, because the 5182 ring pull aluminum plates | 3004/3104 can lid aluminum plates produced by these manufacturers are all shipped directly from the factory, and there is no price difference. For example, Mingtai Aluminum Factory direct sales, the product prices given are relatively more favorable!
5182 ring pull material aluminum plate 3004 3104 can lid material aluminum plate manufacturer direct sales quotation
5182 ring pull material aluminum plate 3004 3104 can lid material aluminum plate manufacturer - Mingtai Aluminum workshop has some products in stock, its shipping specifications are relatively complete, the variety is sufficient, and can be customized on demand to meet the needs of different users, Mingtai Aluminum Our products are all ex-factory wholesale prices. If you don’t know how to choose the appropriate 5182 ring pull aluminum plate 3004/3104 can lid aluminum plate, you can find Mingtai professionals to guide you in your selection and give you more detailed and cost-effective advice. Discounted offers.
|
|
|
|
| 5052 aluminum plate manufacturer_Mingtai Aluminum provides one-stop service |
|
Posted by: mingtaial - 05-24-2024, 08:48 AM - Forum: Selling Leads
- No Replies
|
|
5052 aluminum plate is a typical rust-proof aluminum plate with good processing performance, high strength and wide range of uses. As a professional 5052 aluminum plate manufacturer, Mingtai Aluminum has advanced equipment and skilled production technology. The 5052 aluminum plates produced are widely used in silos, GIS shells, ships, automobile lightweighting, molds, fuel tanks, and precision machining. and other fields. So far, Mingtai Aluminum's 5052 aluminum plate production has reached 1.4 million tons, and its market reputation is very good.
Previously, there were only a few domestic 5052 aluminum plate manufacturers, and prices were always high and delivery times were long, resulting in a shortage of 5052 aluminum plates. After the 1+4 hot-rolling production line of Mingtai Aluminum was put into operation, the monopoly of the Southwest Aluminum market was gradually broken. Mingtai Aluminum's 5052 aluminum plates have quickly gained market recognition due to their advantages of good quality, high output, affordable prices, and fast delivery.
Performance advantages of Mingtai Aluminum 5052 aluminum plate
1. There is no peeling, bubbles, surface roughness and local mechanical damage on the surface of the aluminum plate. There are no cracks, corrosion spots and traces of nitrate on the surface.
2. 5052 aluminum plate has high plasticity and strong corrosion resistance, and is suitable for use in marine environments. It is also widely used in automobile lightweighting.
3. Mingtai Aluminum’s 5052 aluminum plates can have a width of 2600mm and a thickness of 600mm. They are one of the few domestic manufacturers that can produce ultra-wide and ultra-thick 5052 aluminum plates.
Mingtai Aluminum provides one-stop service
The delivery time of Mingtai Aluminum's 5052 aluminum plates is 10-35 days, providing a full range of one-stop services. We track every order in a timely manner from pre-sales consultation to after-sales delivery to ensure that the product is intact. For product packaging, we use paper or film to ensure that the surface of the aluminum plate is intact without scratches; we also install wooden pallets and reinforce it with steel strips to avoid collisions during transportation and ensure that the geometric shape of the aluminum plate remains unchanged.
|
|
|
|
| Cây Mai Vàng "Tiên Lão Giáng Trần" - Hiện Tượng Cây Cảnh Ấn Tượng Tại Bình Thuận |
|
Posted by: tramanh3004123 - 05-24-2024, 03:44 AM - Forum: aluminium faq
- No Replies
|
|
Cây Mai Vàng "Tiên Lão Giáng Trần" - Hiện Tượng Cây Cảnh Ấn Tượng Tại Bình Thuận
Cây mai vàng độc đáo với dáng "Tiên lão giáng trần" tại Bình Thuận đang thu hút sự chú ý của giới chơi cây cảnh không chỉ ở địa phương mà còn trên toàn quốc. Với tuổi đời hơn 100 năm, cây mai này được xem là một hiện tượng trong thế giới cây cảnh.
Anh Đặng Quang Dũng, người sở hữu cây mai vàng này, đã từ chối mức giá mai vàng hoành 40 lên tới 5,9 tỷ đồng từ một người mua ở Nha Trang. Thay vì bán đi với giá cao, anh quyết định đưa cây mai vàng này đến Sài Gòn để tham dự Hội hoa xuân tại Công viên Tao Đàn.
“Tiền bạc rất quan trọng nhưng tôi đã bứng cây mai vàng lên rồi, đang chuẩn bị thuê xe vận chuyển đưa vào TP.HCM dự Hội hoa xuân Tết Nhâm Dần 2022 tại công viên Tao Đàn từ ngày 27-1 đến 6-2 (từ 25 tháng Chạp đến mùng 6 tết). Tôi rất muốn nhiều người được chiêm ngưỡng lão mai độc, lạ bậc nhất Việt Nam này,” - anh Dũng chia sẻ.
![[Image: b7F7FaZrJRiMl8m77uH0ysSiE0NZNUxugY9iMO2V...X80qTxrSN0]](https://lh7-us.googleusercontent.com/b7F7FaZrJRiMl8m77uH0ysSiE0NZNUxugY9iMO2Va8hF4wiZwLa9GA7X-zr_U2C79lp25ZHaMQVeLZ2Qx9UQv_NpGn9X_lE8l2Lb1NPB1pqz7jTO5wv-I785rZZjZoIgU2dSt-C7E48SiX80qTxrSN0)
Sự quyết đoán của anh Dũng đã làm dấy lên niềm háo hức và mong chờ từ phía các người yêu thích cây cảnh. Cây mai vàng này, với dáng "Tiên lão giáng trần" kỳ lạ và tuổi thọ lâu dài, hứa hẹn sẽ là một điểm nhấn đặc biệt trong Hội hoa xuân năm nay.
Cây mai vàng độc đáo từ Bình Thuận, với dáng "Tiên lão giáng trần", đã thu hút sự chú ý của người dân và giới chơi cây cảnh trên khắp nơi. Một người từ Nha Trang đã thốt lên rằng chưa từng gặp một cây mai nào có dáng, thân, và rễ độc đáo như cây mai này và tiếc rẻ vì không thể đưa về Khánh Hòa.
Anh Đặng Quang Dũng, chủ nhân của cây mai vàng này, đã chia sẻ về cây mai này với một câu chuyện rất đáng nhớ. Ban đầu, cây mai này thuộc sở hữu của một cụ ông hàng xóm. Năm 2000, khi anh Dũng chỉ mới 19 tuổi, ông cụ nhờ anh rao bán giúp cây mai với giá 5,5 triệu đồng. Tuy nhiên, với sự độc đáo và quý báu của cây mai này, anh đã quyết định đặt cọc và năn nỉ gia đình bán đất để có được cây mai này. Điều này đã kỳ diệu khẳng định vai trò của anh trong hội mua bán mai vàng miền tây , nơi những cây cảnh quý hiếm được trao đổi và sở hữu.
Hơn 20 năm trôi qua, cây mai vàng này đã trở nên ngày càng đẹp đẽ và phát triển tốt trong vườn nhà anh Dũng. Với dáng cây xù nu đẹp, hoa đều 5 cánh, không lai tạo, cây mai này thực sự là một hiện tượng độc đáo. Với hoành gốc đến 1,13 mét, tán rộng 5 mét và cao 4,5 mét, cây mai này không chỉ là một cây cảnh mà còn là một biểu tượng văn hóa và nghệ thuật của đất nước.
Dù cây mai này có giá trị rất cao và được nhiều người săn đón, anh Dũng vẫn quyết định không bán. Chuẩn bị cho việc đưa cây mai này tham dự Hội Hoa xuân tại Sài Gòn, anh đã dành rất nhiều công sức và thời gian để bảo quản cây mai, đảm bảo rằng nó sẽ được trưng bày một cách hoàn hảo và ấn tượng trong sự kiện nghệ thuật lớn này.
Anh Đặng Quang Dũng, người chủ sở hữu cây mai vàng "Tiên lão giáng trần", đã chia sẻ về việc chuẩn bị cho việc trưng bày cây mai này tại Công viên Tao Đàn. Do gốc cây quá to và bầu đất quá lớn, không có chậu cùng kích cỡ, nên anh dự định sẽ đúc chậu giả giữ bầu đất để mọi người có cơ hội chiêm ngưỡng.
Anh Dũng đã đặt tên cho cây mai cổ thụ của mình là "Tiên lão giáng trần", và hy vọng sẽ giới thiệu với công chúng yêu hoa mai trên khắp cả nước về nguồn gốc mai từ Đức Linh, nơi nổi tiếng nhất Bình Thuận về mai vàng thiên nhiên 5 cánh.
Theo đánh giá của giới chơi mai cổ thụ, đây là cây mai vàng có hình dáng đẹp và độc đáo, được xem là một hiện tượng khó có trong thế giới cây cảnh.
Nhưng không chỉ là một cây mai vàng đẹp và độc đáo, "Tiên lão giáng trần" còn là biểu tượng của sự kiên nhẫn và lòng đam mê của anh Dũng. Ông đã chia sẻ rằng cây mai này ban đầu là của một cụ ông hàng xóm, và vào năm 2000, khi anh mới 19 tuổi, ông cụ đã nhờ anh rao bán cây với giá 5,5 triệu đồng - một con số khá lớn vào thời điểm đó.
Tuy nhiên, với vẻ đẹp và độc đáo của cây mai và lòng đam mê sâu sắc, anh Dũng đã quyết định không để cây rơi vào tay người khác. Thậm chí, anh đã năn nỉ gia đình bán đất để có tiền mua lại cây. Qua hơn 20 năm chăm sóc và nuôi dưỡng, những cây mai vàng này đã phát triển mạnh mẽ và trở thành những chậu mai vàng đẹp nhất .
Với quyết tâm giữ gìn và bảo tồn cây mai vàng "Tiên lão giáng trần", anh Dũng và những người bạn đã rất kỳ công trong việc chuẩn bị để đưa cây này tham gia Hội Hoa Xuân tại Công viên Tao Đàn. Sự quý báu và đặc biệt của cây mai vàng này không chỉ là niềm tự hào của anh Dũng mà còn là niềm tự hào của cả cộng đồng yêu hoa cả nước.
|
|
|
|
| How To Calculate Blister Machine Foil |
|
Posted by: toyota1515 - 05-22-2024, 08:54 AM - Forum: aluminium faq
- No Replies
|
|
How much quantity of printed foil or Lidding Foil & forming foil or base foil is required to blister a specific batch size?
This calculation is confusing for most of the professionals working in pharmaceutical industries because they don’t know how to calculate the quantity of foils required for blistering a tablet or capsule batch.
In this article, we will learn to calculate the quantity of the above-mentioned foils required for blistering by following two methods.
Theoretical Methods
Practical Method
Both these methods are equally important, you can apply any one of the above methods to calculate the foil quantity.
Case Study
Suppose we want to calculate the printed aluminum foil & PVC base foil for for given batch size,
Number of tablets = 500,000 Tablets
Tabs/Blister =10 Tabs
Number of blisters = 50,000
Now we will calculate the quantity of printed & base or forming foil for the above batch size, mean for 50,000 blisters first by using the theoretical method and then the practical method.
1. Theoretical Method
I am used to calling this method theoretical as we can use this method to calculate foils for any new product for which currently we have no tooling available. We can calculate the blister foil from the drawing of the blister using its dimensions.
Example
Suppose we have a blister drawing indicating the length & width of the blister as given below,
Length of Blister = 6cm
Width of Blister = 4 cm
The printed foil & base foil length for each full blister will be
6×4 =24 cm²
Calculation Of Printed Foil
The concept is to cut the piece of printed foil according to the blister length & weight. In the above case, it is a 24cm² piece of printed or Lidding foil.
For more precise calculation we will take the length of printed foil for the theoretical dimensions of 6 blisters as below & weigh it
24×6 = 144 cm²
Suppose the weight of the printed foil piece for 6 blisters is 1.2 GM & weight of the foil piece for one blister is
1.2/6 = 0.2 GM
Foil Quantity For 50,000 Blisters
As we have calculated that the weight of printed foil for one blister is 0.2gm so for 50,000 blisters we will simply use the unit rule
Weight of printed foil for one blister = 0.2 GM
The weight of printed foil for 50,000 blisters is
50’0000×0.2 GM = 10,000 GM
Convert grams into kilograms
10,000/1000 = 10 kg.
Note
10.0 kg foil is required to blister 50,000 blisters. One most important point to remember is that this 10 kilograms of printed foil is Only required for perfectly cut blisters but we know that some scrape is also removed from the sides of the blister during its cutting.
Scrap Factor
The waste which is collected in the form of a web along with the empty rejected Blisters which are removed during machine adjustments is known as the scrap factor.
So we will add 1 or 2 % scrap factor depending on the efficiency of the blister machine.
Here we will add a 1% scrap factor so the total quantity of printed foil for blistering 50,000 blisters will be 10.1 kilograms.
Important Point
The base foil can also be calculated by using the above method.
This theoretical method calculation may have some variations which are discussed at the end of this article in the summary portion.
2. Practical Method
I named this method a practical method because you can perform calculations practically by taking the original samples.
How To Perform
These calculations are performed by taking the original pieces of the printed & base foil which are collected from the blister machine.
To take these samples first of all we install the required tooling & rolls of printed & base foils on the blister machine.
The dummy empty blister is formed on the blister machine in such a way that the blister is not sealed, meaning heat or pressure at the sealing station is not applied.
We get two separate pieces of printed & base foils when the blister is collected after cutting.
Separate the printed foil piece & weigh it & in the same manner, separate the base foil piece & weigh it.
Just like the previous calculation, we will take 6 pieces of each foil for precise weight calculation.
Calculation
Suppose the weight of 6 pieces of printed foil is 1.5 GM & and the weight of 6 pieces of PVC foil is 2.5 GM.
Take the average weight of each piece for one blister as below
For printing foil
1.5/6 = 0.25 GM
For forming foil
2.5/6= 0.41 GM
Printed Foil Calculation For 50,000 Blisters
Weight of printed foil for one blister = 0.25 GM
The weight of printed foil for 50,000 blisters is
50’0000×0.25 GM = 12500 GM
Convert grams into kilograms
12500/1000 = 12.5 kg.
Base Foil Calculation For 50,000 Blisters
Weight of base foil for one blister = 0.41 GM
The weight of printed foil for 50,000 blisters is
50’0000×0.41 GM = 20500 GM
Convert grams into kilograms
10,000/1000 = 20.5 kg
|
|
|
|
|