What's the difference between raw aluminum and cooked aluminum?

[aluhm]

1. hard aluminum alloy which is aluminum and copper, magnesium, manganese and so on. This kind of aluminum alloy is suitable for pressing rolling. The strength and hardness of the products are much larger than that of the ordinary aluminum products. They are much more.
2. raw aluminum than ordinary aluminum products: many impurities, very brittle, and a knockout. The raw aluminum is often recycled aluminum, it is the.3. ripe aluminum which is reused by the broken aluminum pot and the broken aluminum spoon. The content of aluminum is about about the content of aluminum 98%, impurities (mainly iron and silicon) about 2% or slightly more j are relatively pure aluminum. It is soft and can be crushed into a variety of shapes. The daily aluminum pan, aluminum lunch box, aluminum sheet, aluminum wire and aluminum tube are all cooked aluminum. The difference between them can be clearly seen from the definition.

[1-LVDCPN]

Hard aluminum: aluminum and copper, magnesium, manganese and other alloys. This aluminum alloy is suitable for pressing and rolling, and the strength and hardness of the products are much larger than that of ordinary aluminum products.

Raw aluminum is often made from recycled aluminum, which is collected and resmelted by the aluminum ladle.

Wrought aluminium, aluminium content is about 98%, impurity (mainly iron and silicon) about 2% or slightly more j is relatively pure aluminum, it is soft, can crush into various shapes. Daily with aluminum pan, lunch boxes, aluminum aluminum, aluminum wire, aluminum tube, are made of wrought aluminium.


Cooked aluminum content: over 98% aluminum, soft nature.
Raw aluminum content: 98% aluminum, the property is brittle.
Aluminum (aluminum casting aluminum), the chemical composition of raw aluminum made from a kind of natural high purity alumina extracted not aluminum. Aluminum is not pure aluminium, it like cast iron, hard knock is broken. Common aluminum, light and thin, it is cooked aluminum. Aluminum alloy is in pure aluminium mixed in small amounts of magnesium, manganese, copper and other metal smelting, and corrosion resistant ability and rigidity are greatly improved. I hope it can help you

Raw aluminum (aluminum) is a low-purity aluminum extracted from a natural chemical composition called alumina. Raw aluminum is not pure aluminum, it is like pig iron, it is broken as hard as hard.

The common aluminum products are light and thin. This is cooked aluminum. Aluminum alloy is mixed in pure aluminum with a small amount of magnesium, manganese, copper and other metals smelting, corrosion resistance and hardness are greatly improved.

[askaluadmin]

Aluminum metal mainly consists of mature aluminum, raw aluminum and alloy. These terms are commonly known as, so there is no written stringent quality standard. In general, the aluminum in solid waste is aluminum content, which is basically free of other metal elements. Raw aluminum refers to the solid waste aluminum containing a certain amount of silicon, a higher hardness of waste aluminum, the alloy generally refers to the aluminum content of more than 97 percent, containing about 1 percent of the magnesium waste aluminum. Of course this interpretation is far-fetched, and the actual situation may be more complicated. The United States also has a classification standard for waste aluminum, but it is different from the above. Wrought aluminium, aluminium and its alloy should be: the explanation of folk call "raw aluminum aluminum industry is" on the "alloy" it was based on aluminum and silicon is given priority to, or add some alloy elements, used for casting molding, products are casting namely; Aluminum alloy aluminum "practice" is the "deformation", seven points on international alloy series, namely 1 series - pure aluminium, a series of 2 - aluminum copper, 3 series - manganese, 4 - al-si series, the series 5 -, 6 series - aluminium magnesium, silicon, aluminum magnesium 7 series - aluminum zinc magnesium, aluminum pipe, aluminum rod, aluminum, aluminum wire, aluminum plate, aluminum foil, etc are all categories deformation aluminium alloy, the machining deformation forming, they include pure aluminum and aluminum alloy; "Alloy" is not a class, aluminum products include pure aluminum and aluminum alloy products. "Raw aluminum" and "cooked aluminum" are now called "cast aluminum" and "deformed aluminum". Questions referring to the "aluminium scrap" refers to after using the waste into the market all kinds of aluminum, aluminum scrap on the market in addition to "cast aluminium" (i.e., is a high silicon) and aluminum "practice", pay attention to the strict classification by alloy into use.