haomei Aluminum Teach You How To Choose Aluminum Tread Plates

[aluhm]

In the production and life aluminum tread plates is extremely wide variety, checker aluminum plate type is also very large, five bars aluminum tread plate, three bars aluminum tread plate, Diamond aluminium tread plate and so on a wide range, with the strong market demand, many manufacturers want to market a share, but due to investment funds And the difference between the processing of many poor quality products flooding the market, allowing customers to buy when the aluminum tread plate to increase the number of wind direction, haomei Aluminum from the perspective of professional aluminum tread plate factory as you how to select high-quality checkered aluminum plates.
Select the aluminum tread plates first look at the thickness
The thickness, strength and thickness of the oxide film should meet the national standard: aluminum plate thickness ≥1.2mm, tensile strength≥157N / mm2, yield strength≥108N / mm2, oxide film Thickness ≥ 10 microns. If not up to standard, is poor quality pattern aluminum.

Select aluminum tread plates followed by processing
Formal factory production of aluminum tread plates, materials stress, smooth and bright plate surface, pattern clear and tidy, aluminum flat, the surface without oil, scratches, broken injuries and other defects; and small factory production pattern aluminum, aluminum scrap material, The surface is dull, pattern is not clear, irregular, the board is not flat, the performance is not up to standard, poor quality.
Select the aluminum tread plates to see the third price
Aluminum tread plates is divided into pure aluminum and alloy two, the price is not the same. Regular manufacturers of tread aluminum plate processing fee of a ton in a few thousand dollars, the alloy price is higher than pure aluminum, regular manufacturers of aluminum than the poor price of aluminum to 20% -30% higher.Enterprises in the procurement, should not be single than the price, buy substandard products, then regret the later carry on.
Select the aluminum tread plates to see the fourth service
From the factory's production line to the workshop, the middle to go through the packaging, loading, transportation, storage, open package many links, pattern aluminum inevitably oxidation, scratches and the like defects, large-scale, good service providers will provide users Back, for services, to solve the user to worry about.

[haomeialu]

How to Select Aluminum Tread Plate?



1. Pay Attention to the Statistics of Aluminum Tread Plate

High quality aluminum tread plate should live to national standards, including raw material, thickness, strength, so on and so forth. The thickness should over 1.2mm, the strength should over 157N/mm squre, the yield strength should over 180157N/mm squre. If theses statistic cannot be satisfied, then it must be aluminum tread plate with poor quality.

2. Pay Attention to the Processing of Aluminum Tread Plate

Big manufacturers can produce aluminum tread plate with smooth surface, no scratch, oil contamination, and other defeats. Small manufacturers may use scraps of aluminum as material, which cause dark on the surface, bad properties and quality.

3. Pay Attention to the Price of Aluminum Tread Plate

Aluminum tread plate can be divided into pure alloy aluminum and alloy aluminum and the prices of them are different, too. Generally speaking, the processing fees of aluminum tread plate are several thousand RMB. Price of alloy is higher than pure aluminum. However, big manufacturers with high quality products must have higher price than that products of poor quality. So buyers should not only compare prices, but also product quality and comprehensive strength.

4. Pay Attention to the Service of Aluminum Tread Plate Manufacturer

From production to packaging, loading, delivering and other procedures, aluminum tread plate might be damaged if not cautious. Big manufacturers can provide good protection to every product in case of damage, such as cover film and paper, loading with pallet and other methods. Besides, as a good manufacturer, haomei aluminium can provide after sale service to guarantee customer

[1-LVDCPN]

Aluminum tread plate is widely used in the production and living, decorative aluminum tread plate type very much, also five, there are many different kinds of three bones and muscles, and so on, with the strong market demand, many manufacturers want to share in the market, but because of the difference of the money and processing technology a lot of bad products flooding the market, let the customer aluminum tread plate increased a lot of the wind, when the choose and buy is aluminum industry from the perspective of professional pattern aluminum manufacturer like introduce how to choose high quality aluminum tread plate.

How to Choose Aluminum Traed Plate



High quality aluminum tread plate of the selected sheet, its thickness, strength and thickness of oxide film should meet the national standards, such as: aluminium plate thickness of 1.2 mm or more, the tensile strength of 157 or more cattle per square millimeter, yield strength of 108 or more cattle per square millimeter, thickness of oxide film or 10 microns.If can not meet the standard, it is inferior aluminum tread plate.

Regular pattern of aluminum metal production, dainty materials, board face is bright and clean bright, decorative pattern is clear and tidy, aluminum level off, the surface without oil, defects such as scratches, broken;Aluminum plate and small factory production of decorative pattern, made from aluminium scrap material, the surface is bleak, decorative pattern is not clear, not neat, the plate is not level off, the performance is not up to standard, the quality is poor.

Aluminum tread plate is divided into two kinds of pure aluminum and alloy, the price is different also.Normal manufacturer production pattern of aluminum processing a ton in several thousand yuan, the price is higher than that of pure aluminum alloy, normal manufacturer of aluminum price is 20% higher than inferior aluminium plate - 30%.Enterprises in the procurement, avoid by all means is not single than price, buy the unqualified products, it is too late to regret.

From the factory production line to the enterprise's workshop, intermediate undergoes packaging, loading, transportation, storage, package, etc, decorative aluminum tread plate appears unavoidably oxidation, scratch defects, such as large scale, good service suppliers to provide users with retreat, in service, for the user to solve the trouble back at home.