01-30-2018, 06:04 AM
I’m looking for guidance for a starting point to “cut out” a design from 1.6mm aluminium sheet . I see reference to a Video with settings that Ryan posted about a year ago but I can’t find it and having read through some of the posts on the forum I can’t find any basic settings to start out: X and Y speeds, depth of cut, accelerations and router RPM etc. I plan to use a 3mm bit and accept that with a Makita router any suggestions would only be a starting point but any guidance would be appreciated. Using Estlcam 10 as the CAM generator and controlling from an SD card.